CampAwareHelp campaware.com

Chapter 1

Getting started

CampAware watches the weather around your camp all day and all night. When a real warning covers the camp, or lightning comes close, it sounds an alarm on every staff phone and tells each person where to go. This chapter gets you installed, into your camp, and ready for the first alert.

1.1CampAware Help

Everyone

Every screen in CampAware has a ? at the top. Tap it to read about that screen: what it is for, the steps, and where to find it again.

Start here:

Still stuck? See Contact support.

1.2What CampAware does

Everyone

CampAware is a weather-safety app for summer camps. It does four jobs:

  1. Watches the weather for your camp's exact spot. It checks National Weather Service warnings and satellite lightning every minute. A warning only counts when the camp is inside the warning area, never because of a warning somewhere else in your county.
  2. Sounds the alarm on every staff phone when a warning covers the camp or lightning comes inside your camp's alarm ring. The alarm says what is happening and where each person's cabin goes, and shows the way on the map.
  3. Counts everyone. Each alarm opens a headcount. Cabin leaders mark who is with them, and camp command sees every cabin's count on one board.
  4. Keeps the records. Drills, training, headcounts and alerts are logged automatically, and the emergency plan builder turns your answers into a printable plan for your county.

Note

CampAware does not replace a NOAA Weather Radio, outdoor sirens or your own eyes on the sky. Use it alongside them. Keep at least one way of getting warnings that works without cell service.

1.3Install CampAware

Everyone

CampAware is free to install. Everyone on staff installs it on their own phone.

  1. Install CampAware from your phone's app store (Google Play on Android). While CampAware is in early testing, your camp sends you the link to install it.
  2. Open it. You see Camp safety that never sleeps. with three choices: - Join my camp: for staff and cabin leaders. See Join your camp. - I run a camp (admin sign-in): for the camp director or whoever set up the camp. See Set up your camp as its admin. - New to CampAware? Try a free Test Camp: to look around on a made-up camp first. See Try a free Test Camp.

1.4Join your camp

Everyone

To join, you need your camp's camp code: six letters and numbers that your camp director shares with staff.

  1. On the welcome screen, tap Join my camp.
  2. Type the Camp code. Capital letters are filled in for you.
  3. Type Your name, the way your camp knows you. Camp command sees this name on the people list and in headcounts.
  4. Tap Join.
  5. CampAware asks to send notifications. Tap Allow. See Allow notifications.

The camp's map opens. You're in.

If your camp sent an invite link (campaware.com/join/…), tap it on your phone. The page shows the code. If CampAware is already installed, the link opens the app with the code filled in.

1.5Allow notifications

Everyone

Alarms reach you as notifications. If notifications are off, no alarm can reach your phone, even in a tornado warning.

  1. When CampAware asks to send notifications, tap Allow.
  2. To check later, open Me and notifications. It says Alerts can reach this phone (green) or Alerts cannot reach this phone (red).
  3. If it's red, tap it. If your phone still says no, open your phone's Settings → Apps → CampAware → Notifications and turn them on.

Caution

Keep your phone's ringer on during camp. A phone on silent or Do Not Disturb may show the alarm without making a sound.

1.6Try a free Test Camp

EveryoneTest Camps only

A Test Camp is a small made-up camp, set up and ready, so you can try every screen before you set up your own. It has:

  • two cabins and three shelters, each cabin with its own shelter;
  • 20 made-up campers to check in and out, with room to add your own;
  • a Practice storm you can run from Drills, with the real alarm and a headcount, marked PRACTICE;
  • the emergency plan builder, ready to fill in and print.

Start one:

  1. On the welcome screen, tap New to CampAware? Try a free Test Camp.
  2. Type Your name and Your email. We email you your Test Camp details.
  3. Tap Start my Test Camp.

You become the Test Camp's admin, so every screen opens for you.

What's different about a Test Camp:

  • It sits at a made-up spot in central Florida, where storms are common, so the live map often shows real storms nearby.
  • It never sends live weather alarms. An amber strip across the top says so: TEST CAMP · made-up location, so no live weather alarms.
  • To see what your staff get in a storm, run a Practice storms.
  • It lasts 30 days. See When a Test Camp ends.

1.7Set up your camp as its admin

Camp admins

The camp admin is the person whose email CampAware has for the camp, usually the camp director. The admin signs in once on their phone to unlock Admin tools. Your camp code and admin email are in the email CampAware sent when your camp was set up.

Setting up takes two steps:

  1. Join the camp. Tap I run a camp (admin sign-in). The screen says Step 1 of 2. Type the Camp code and Your name, then tap Join.
  2. Sign in with your admin email. The Camp admin sign-in screen opens by itself. Follow Sign in as camp admin.

When it works, Admin tools appears in the camp's panel. Next, follow Quick start: camp director.

1.8Leave a camp

Everyone

When you're done at a camp, or joined the wrong one, leave it. You stop getting its alerts, and the phone goes back to the welcome screen.

  • Me and notifications → Leave this camp (Stop getting its alarms on this phone), then confirm.
  • If the camp won't open, its screen has Join a different camp, which leaves it the same way.

You can join again any time with the camp code.

1.9Who sees what

Everyone

What you see in CampAware depends on your role. The camp admin sets each person's role, cabin and emergency duty in People and duties.

Who Gets Can open
Staff (everyone who joins) Level 2 and 3 alarms Map, Alerts, Rally points, Me
Cabin leaders Everything staff get, plus quiet Level 1 notices My cabin: check-in and the cabin headcount
Duties: Waterfront, Medical, Communications Level 1 notices too The same as staff. The Communications Lead also gets Message parents when the camp has parents turned on
Camp command: the Camp Emergency Leader and the Emergency Coordinator Level 1 notices too Headcount board, Drills and training, and Message parents when the camp has parents turned on
Camp admin (signed in by email) Level 1 notices too Admin tools, and everything camp command has
Parents Only if the camp turns parents on: messages and a parent page by email No app needed. See The parent page

See Alert levels 1, 2 and 3 for what Level 1, 2 and 3 mean.

1.10Quick start: camp director

Camp admins

Set up your camp in this order. Each step has its own help page.

  1. Sign in as admin. Set up your camp as its admin.
  2. Set the camp's location. Nothing works until the camp has a location: no map, no warnings. Set the camp's location.
  3. Choose the lightning rings and headcount style. Settings.
  4. Add shelters and rally points, with how many people each holds. Shelters and rally points.
  5. Add cabins, and choose where each cabin goes for each hazard. Cabins. Optional: draw your cabins, buildings and trails in Google Earth and import them, so they show on everyone's map. Draw your camp on the map.
  6. Share the camp code with your staff. They install CampAware and join. Share the camp code.
  7. Give people their roles: cabin leaders, the Camp Emergency Leader, the Emergency Coordinator and the other duties. People and duties.
  8. Load the roster of campers and adults. Load the registration list.
  9. Answer the hazard questions and build your plan. Hazard questions, Emergency plan builder.
  10. Run a drill so everyone knows what the alarm looks like. Run a drill now.

1.11Quick start: cabin leader

Cabin leaders

  1. Join your camp with the camp code and allow notifications. Join your camp.
  2. Your camp admin makes you a cabin leader and gives you your cabin. Then the panel shows My cabin: … with your cabin's name.
  3. Check campers in as they arrive. Check people in and out.
  4. Know your cabin's shelter. Open Rally points to see it on the map. The alarm also names it for you.
  5. When the alarm sounds: go to the shelter it names. A headcount opens. Tap each person as you see them, then Send count. Count your cabin in an alarm.
  6. Level 1 notices (watches, lightning farther out) come to you quietly, with no alarm. Keep your campers near shelter.

1.12Quick start: staff

Staff

  1. Join your camp with the camp code and allow notifications. Join your camp.
  2. Keep your ringer on during camp.
  3. When the alarm sounds, read where to go, tap Show me on the map if you need the way, and go. The alarm screen.
  4. Missed something? Alerts lists everything the camp was sent. The Alerts list.