Chapter 7
Setting up your camp
For the camp admin. Admin tools is where you set up the camp: its location, shelters, cabins, people and roster. Follow the order in Quick start: camp director the first time.
7.1Sign in as camp admin
Camp admins
There's no password. CampAware emails you a sign-in link.
- Type your Camp admin email: the address your camp gave CampAware for its admin.
- Tap Email me a sign-in link.
- On this phone, open the email from CampAware. Press and hold the sign-in link and choose Copy link address.
- Come back to CampAware and paste it into Sign-in link (the paste button is at the right of the box).
- Tap Sign in.
You see Signed in as …, and Admin tools appears in the map's panel.
If you tapped the link instead, a campaware.com page opens: Finish signing in on your phone. Tap Copy sign-in link there, then paste it in CampAware as in step 4.
Each link works once and expires. If it doesn't work, tap Send a new link. See The admin sign-in link doesn't work.
7.2Admin tools
Camp admins
Camp admin has everything for running the camp, in groups:
- Camp code: share it with staff, or make a new one. See Share the camp code.
- Copy email alert sign-up link: for staff who also want alerts by email. See Email alerts.
- CampAware service: whether your camp's alarms are on, and until when. See Is CampAware on for my camp?.
- Camp location: where the camp is. See Set the camp's location.
- Camp map drawing: import your cabins, buildings and trails from Google Earth. See Draw your camp on the map.
- Set up the camp: Settings, Shelters and rally points, Cabins, People and duties, Camper and adult roster.
- Each session: Sessions and sign-off, Drills and training.
- Plan, parents and records: Hazard questions, Emergency plan builder, Parents, Records for the county.
Each line shows a short summary, so you can see at a glance what's set up.
7.3Share the camp code
Camp admins
The camp code is at the top of Admin tools, in large amber letters. Staff install CampAware and join with it. Share it only with your staff.
- Copy invite copies a ready-made message with the code and a join link (campaware.com/join/…). Paste it into a text or email to your staff.
- New code makes a new code at once. The old code stops working, but people who already joined stay in the camp. Use it if the code got out. People already signed up for email alerts stay signed up, but sign-up links you already shared carry the old code, so copy and share a new one. See Email alerts.
7.4Set the camp's location
Camp admins
Nothing works until the camp has a location: no map, no warnings.
- In Admin tools, under Camp location, tap Set (or Move).
- Move the map so the pin sits on the middle of camp. Tap My location to start from where you're standing.
- Tap Use this spot.
Warnings sound when this spot is inside a warning area, and lightning is measured from here. CampAware also sets the camp's time zone from it.
7.5Draw your camp on the map
Camp admins
Put your cabins, buildings and trails on everyone's map, so staff can find a shelter they've never been to. You draw them in Google Earth, then import the file into CampAware.
1. Draw in Google Earth
- In Google Earth, make a folder for your camp.
- Choose a winter satellite view if you can, when trees have no leaves and roofs and paths are easy to see.
- Draw an outline around each cabin, building, field or pond, and a line along each trail or road. Put them all in your folder.
- Right-click the folder, choose Save Place As, and save it as KML or KMZ. Get the file onto your phone, for example by emailing it to yourself or saving it to your phone's cloud storage.
2. Import it
- In Admin tools, tap Camp map drawing.
- Tap Import a KML or KMZ file and choose your file.
- CampAware says what it found, for example Import 24 shapes? Found 18 outlines (cabins, buildings, areas), 6 lines…. Tap Import. If the camp already has a drawing, choose Add to it or Replace the drawing.
Shapes more than 15 miles from camp are left out, and CampAware tells you how many.
3. Name each shape
New shapes are listed under Not labeled yet. Only labeled shapes show on everyone's map. Tap each one to open Name this shape, which shows it outlined in yellow on a small map:
- Type the Name people at camp use.
- Under What is it?, choose Cabin, Building, Shelter, Area (field, court, pool), Water (lake, creek, pond), Hazard (steep bank, deep water), Trail or road, or Hide it (don't show on the map).
- For a Cabin, choose Which cabin from your cabins, or A new cabin with this name. Each cabin has one shape, and each cabin leader sees their own cabin outlined in amber.
- Tap Save.
4. Mark where people shelter inside a building
On any outline, under Shelter spots inside, tap Add a shelter spot in it. A new shelter opens, named after the building. Tap Move: the map zooms into the building. Put the pin where people go inside, like the inside hallway or the basement stairs, then fill in the shelter as in Shelters and rally points. It's a normal shelter from then on, and alarms send cabins to it.
Change or remove it
- Open a shape and tap Delete shape to remove just that one.
- Remove the drawing takes every shape off the map. Your cabins and shelters themselves stay.
CampAware reads KML and KMZ files for now. Other formats, such as shapefiles or CAD drawings, aren't supported yet.
7.6Settings
Camp admins
Lightning. Two rings around camp:
- Get ready (Level 1) inside: 1 to 30 miles. Leaders get a quiet notice.
- Alarm (Level 2) inside: 1 to 25 miles. Everyone gets the alarm.
Use − and + to change them, then tap Save lightning distances. The alarm ring can't be bigger than the get-ready ring. Each clears after 30 minutes with no lightning inside it.
Headcounts. Choose one:
- By cabin: each cabin leader counts their own cabin at its shelter and reports to the Emergency Coordinator.
- One roll call for the whole camp: camp command counts everyone on one list.
Parents and photos.
- Parent page and parent messages: off until you turn it on. See Parents.
- Camper photos at check-in: leaders may take a photo so they know each face. See Camper photos.
7.7Shelters and rally points
Camp admins
Add each place people go: tornado shelters, flood high ground, lightning shelters and a general meeting point. Then give each cabin its own shelter in Cabins.
Add one:
- Tap Add.
- Under Mainly for, choose what it's for: Tornado and high wind, Flooding, Lightning, Heat, Cold and ice, Smoke and wildfire or General meeting point.
- Type a Name people will recognize, for example Cabin 3 shower rooms.
- Tap Pick on map and put the pin on the shelter's door or the meeting spot.
- Fill in Holds (people). If it holds fewer at some times, add the Smaller number and When the smaller number applies, for example West shutters open.
- Tick everything else it's Approved for.
- Tap Save.
If more people are assigned to a shelter than it holds, the list warns you: Over capacity. Move a cabin to another shelter.
To delete a shelter, open it and tap the trash can. Cabins sent there go back to the camp's default shelter.
7.8Cabins
Camp admins
Add shelters first, so you can pick them here.
- Tap Add a cabin.
- Type its Name, for example Cabin 3A. Order in lists sets where it appears; Sleeps (optional) is how many it sleeps.
- Under Where this cabin goes, choose its shelter for Tornado and storms, Flood, Lightning and Anything else. Each can be Camp default, one of your shelters, or (except for tornadoes) The nearest building.
- Tap Save.
The alarm sends each cabin to its own shelter. See Where to go.
Deleting a cabin keeps its leaders and campers in the camp, without a cabin.
7.9People and duties
Camp admins
Everyone who joined with the camp code is listed here.
Duties (top): who holds each emergency duty, or Not assigned.
| Duty | Job |
|---|---|
| Camp Emergency Leader | In charge in an emergency; calls 911 and the county |
| Emergency Coordinator | Keeps the master headcount; steps in for the leader |
| Waterfront Safety Lead | Clears the water at any alert |
| Medical / First Aid Lead | First aid; needs current First Aid / CPR |
| Communications Lead | Weather radio; parent messages when leadership says |
There's one Emergency Leader and one Coordinator at a time. They are camp command: they get the Headcount board and Drills and training.
Change a person: tap their name, then choose:
- Staff or Cabin leader;
- their Cabin;
- their Emergency duty, or None.
Tap Save. Remove from camp takes them off this camp's alerts; they can join again with the camp code.
7.10The roster
Camp admins
The roster is everyone at camp this session: campers, adults, visitors and contractors. Cabin leaders check them in and out, and headcounts count them.
- Find a name searches the list.
- Add adds one person: Full name, Who (Camper, Adult leader or staff, Visitor, Contractor), Cabin, the parent's Name, Email and Phone, and Notes (optional).
- Tap a person to edit them, or to take them off the roster.
- The upload button loads a whole list at once. See Load the registration list.
Each camper's page also shows the parent hazard disclosure: acknowledged online, or tick Signed paper disclosure is on file. See Paper disclosure forms.
Only camp command can see the whole roster. The roster and parent contacts are deleted 30 days after the session. See What CampAware keeps, and for how long.
7.11Load the registration list
Camp admins
Load the whole roster from your registration spreadsheet in one go.
- Add your cabins first. See Cabins.
- In your spreadsheet, put the columns in this order: Name, Cabin, Camper or Adult, Parent name, Parent email, Parent phone.
- Select the rows and copy them.
- In Roster, tap the upload button (Load the registration list).
- Paste, and tap Load.
One person per line. A first row of column titles is skipped. Cabin names must match the cabins you added exactly.
CampAware says how many were added, and lists anyone it couldn't add, with the reason. Fix those rows and load just them again.